Biography

Hilmi Fadhil Ameen is an assistant professor at the electrical engineering department at Salahaddin University-Erbil. He has received a B.Sc. degree in electrical power engineering from the Electrical Engineering Department, College of Engineering, University of Salahaddin-Erbil, Iraq, since 1991. M.Sc. degree in Electrical power engineering from the Electrical and Electronics Engineering Department, University of Technology, Baghdad, Iraq, since 2003. Also, he received a PhD degree in Electrical power engineering from the Electrical Engineering Department, College of Engineering, University of Salahaddin-Erbil in 2022.

In 1991, he joined the Iraqi and Kurdistan Engineering Union. He was the first at the college, and Since 1992 he has worked as an assistant engineer in the Electrical Engineering Department, Engineering College, Salahaddin University-Erbil. Since 2003, he has been an academic staff member with the Electrical Department in the College of Engineering, Salahaddin University, Erbil, Iraq.

Currently, Hilmi is an assistant professor in the Electrical Engineering Department, College of Engineering, Salahaddin University, Erbil, Iraq. Since 2011.  He is an expert in Electrical machine drive and control. He published around 26 papers in local and International journals and conferences. He works as a reviewer for the Zanco journal of pure and applied science, the AEEE journal,  and many international Journals and Conferences.

Research Interest

My research interests lie in the domain of electrical power systems, with a particular focus on the operation and performance of electrical machine drive systems under conditions of poor power quality. I am keenly interested in investigating the impact of voltage unbalance, harmonic distortion, and other power quality issues on the reliability and efficiency of drive systems. Additionally, I am passionate about the design and optimization of photovoltaic (PV) systems, especially in the context of integrating renewable energy sources into the grid. My work also extends to analyzing the effects of harmonics and unbalanced voltage supply in renewable energy systems, aiming to enhance their performance, stability, and compatibility with modern electrical infrastructures.

Publications

  1. Arfan Mohammed Salih Hassan, Hilmi Fadhil Ameen, Salar Ahmed Qadir, Halkawt Abdalqadir Kh Ahmed (2025), Kalman Filter Prediction Method for Tracking the Fuzzy-Based Maximum Power Point in Wind Turbine Generators, Passer Journal of Basic and Applied Sciences, 10.24271/psr.2025.482587.1772.
  2. HF Ameen, AA Rasool (2025), Identifying of rotor converter effects on the chopper control slip ring induction motor performances under grid voltage unbalance, Eastern-European Journal of Enterprise Technologies, 10.15587/1729-4061.2025.322918.
  3. HF Ameen, HA Hamad, AA Rasool(2024), Performance Evaluation of Different NEMA Induction Motor Designs under the Effect of Unbalanced Supply Voltages, Tikrit Journal of Engineering Sciences, 10.25130/tjes.31.4.16.
  4. Bekhal Abdulla, Hilmi F. Ameen (2025), A Comprehensive Literature Review of Wound Rotor Induction Motor Drive System by Rotor Impedance Variation, The 3rd International Conference on Engineering and Innovative Technology, 10.31972/iceit2024.038.
  5. Zaman S. Ahmed, Hilmi F. Ameen (2025), Feasibility Study and Economic Consideration of Rooftop PV System for Replacing of Diesel Generators in Erbil City, The 3rd International Conference on Engineering and Innovative Technology, 10.31972/iceit2024.048.
  6. HF Ameen (2023),The Influence of Rotor Converters on the Behavior of Static Rotor Resistance Control of Induction Motor under Supply Voltages Asymmetry, Zanco Journal of Pure and Applied Sciences, 10.21271/ZJPAS.35.5.3.
  7. A Hilmi (2023), The Impact of Rotor Converters on the Performance of Static Kramer Induction Motor Operating with Voltage Unbalance, Journal of Electrical and Electronics Engineering, JEEE, Volume 16, number 1, May 2023.
  8. NA Othman, HF Ameen (2022), The influence of non-sinusoidal voltage sources on the steady state performance of different NEMA Designs of IMs, 10.21271/ZJPAS.34.6.2.
  9. A Hilmi, A Fadhil (2021), Performance Analysis and Modeling of SRRCCIM under the Impact of Unbalance Supply Voltage, Journal of Electrical and Electronics Engineering, JEEE, Volume 114, number 2, May 2021.
  10. HF Ameen, FT Aula (2021), Performance Analysis of the Slip Power Recovery Induction Motor Drive System Under Unbalance Supply Voltages, AEEE, 10.15598/aeee.v19i3.4050.
  11. BS Ibrahim, SJM Shareef, HF Ameen (2021), Performance Analysis of Photovoltaic Panels Under the Effect of Electrical and Environmental Parameters in Erbil City, UKH Journal of Science and Engineering, 10.25079/ukhjse.
  12. HF Ameen, FT Aula (2020), Performance Analysis of WRIM Drive System Operating under Distorted and Unbalanced Supply: A Survey. Zanco Journal of Pure and Applied Sciences10.21271/ZJPAS.32.6.20.
  13. HF Ameen, BS Ibrahim (2016), The Current Control Regulator Parameters Effect based on PI+ MR of DFIG WT under Grid Voltage Distortion at PCC, Zanco Journal of Pure and Applied Sciences, 10.13140/RG.2.2.15730.38081.
  14. BS Ibrahim, HF Ameen (2016), The DFIG WT Performance under Grid Voltage Distortion with Proportional Integral and Multi Resonant Current Controller, ZANCO Journal of Pure and Applied Sciences, Vol. 28, number 2.
  15. HF Ameen (2011), Computer simulation and mathematical modelling of static rotor resistance chopper control of WRIM by reference frame theory,  Procedia Computer Science, 10.1016/j.procs.2010.12.166.
  16. IK Saeed, HF Ameen (2011), ANN-Based WRIM Speed Control and Harmonic analysis of Rotor Chopper Resistance, Journal of Engineering and Sustainable Development, Vol. 15 NO. 2.
  17. Hilmi F. Ameen (2011), Minimizing Rotor Current Distortion of WRIM Chopper Resistance control Using Third Harmonic Current Injection, ZANCO Journal of Pure and Applied Sciences, June-2011.
  18. Ali A. Rasool, Hilmi F. Ameen (2011), ANN-Based Speed Control by Slip Power Recovery of IM. Journal of Dohuk University, Vol.14, No. 1.
  19. HF Ameen (2011), Total harmonic reduction of WRIM chopper resistance control using three phase boost rectifier in rotor circuit, ZANCO Journal of Pure and Applied Sciences, Vol. 22, No. 3. 
  20. Hilmi F. Ameen (2011), Total harmonic reduction of WRIM chopper resistance control using three phase boost rectifier in rotor circuit, ZANCO Journal of Pure and Applied Sciences, Vol. 22, No.3.
  21. Hilmi F.Ameen Hussein I. Zynal, Salar A.Kadir (2010), New Design circuit harmonic reduction of single phase converter by current injection method, The international conference on renewable energy( ICRE) , Damascus, Syria, 5-8, April 2010.
  22. Diary R Sulaiman, HF Ameen, Ismail K Said (2010), Design of high efficiency DC-DC converter for photovoltaic solar home applications, Journal of Energy and Power engineering, November 2010, Volume 4, No.11.
  23. Hilmi F. Ameen (2007), Stator current harmonic analysis and torque pulsation of wound rotor induction motor speed control by chopper resistance in rotor circuit, ZANCO Journal of Pure and Applied Sciences, Vol. 19, No.1.
  24. Hilmi F. Ameen (2006), High Chopper Frequency Drive of Wound Rotor Induction Motor With a Resistively Loaded Rotor Chopper, ASTF-SRO4 Conference, Damascus, Syria, 2005. 
  25.   Diary R Suleiman, Hilmi Fadhil Ameen, Nuradin Taha Husein (2006), Using fan speed control method for microprocessors dynamic thermal management, WSEAS Transactions on Circuits and Systems, Vol. 5, No.1.
  26. Ismail K. Said Hilmi F. Ameen (2006), Torque pulsation Reduction of Slip Ring Induction Motor Speed Control by Static Chopper Resistance, Conference on Scientific Research Outlook & Technology (SRO4), , Damascus, Syria, 2006.
  27.   NURADIN TAHA HUSEIN DIARY R SULEIMAN, HILMI Fadhil AMEEN (2005), Microprocessors Fan Speed Control for Dynamic Thermal Management, 4th wseas international conference, Tenerife, Spain, December 16-18, 2005.
  28. Zuhar Z. Shbeeb Hilmi F. Ameen (2002), Closed loop control for a power MOSFET chopper control slip ring induction motor, International conference NC on CCCSE, Baghdad, Iraq. 

 

Teaching

Undergraduate study

AC Machine I

AC Machine II 

Postgraduate study

Electrical Machine Design

Electrical Machine Theory

Electrical Power Distribution Systems